KX-T: KXTD1232 Paralled Connection

[Carl Navarro]

At 02:12 PM 4/3/2009, Paul Tys wrote:
>Hi, some help please.
>
>I have a Panasonic KXTD 1232 with 12 Analogue Line.
>
>I am trying to do a parallel connection between a Pan KXTD 7431 
>(Digital Phone) and a 2 wire ordinary Pot phone.
>
>The socket i have done for the Digital KXtd 7431 phone is L & H, 
>positions 1 and 6 on a secondary socket
>
>The socket i have done for the 2 wire ordinary phone is A & B, 
>positions 2 and 5, Master Socket
>
>On the panasonic KXTD 7431 phone I have enabled parallel connection 
>via entering 691 to activate on the phone.
>
>In programming sequence 600 i have enabled XDP option, which would 
>give the extension of 306 for the ordinary 2 wire POT phone, the 
>Digital phone is extension 206.
>
>However, The Pan 7431 works perfect as usual, but I cannot get the 
>Parallel ordinay telephone to work. If i go off hook on the Pot I do 
>not get any dial phone, when i ring into extension 206 (Pan 7431 
>Digital Telephone rings but not the parrelled 2 Wire Pot phone)
>
>What have I done wrong (i dont think ive done anything wrong) or 
>what do i need to do to get both digital and 2 wire pot to work together.
>
>Many thanks in advance for any help given,

On our side of the pond we use pins 3&4.  Unplug the digital phone 
and plug your single line device into the socket.  If it doesn't 
work, look for a cable that converts or uses the center pins and test it.

Carl