KX-T: Voicemail

[Michael Karaman]

Do the same, you can't go wrong.
The Pairs:
1st - analog
2nd - digital (really the one that you need)
3rd - for the old 7130 OHCA feature - never used on anything else
They then repeat for the next port.  
8 ports per 25 pair cable (8 X 3 = 24 pairs + 1 unused pair)

If you punch down pairs 1 & 2 on the block and then to a 6 position, 4 pin
modular plug (pair 1 center 2 pins, pair 2 outer 2 pins), and program the TD
properly, you will have digital integration.  If it worked before, it should
work now too.

The TVA50 is only a 2 port system - 2 calls at the same time.  Only ONE
digital PORT is necessary.  If  you connect a 2nd, it will do nothing
(unless you are in analog integration, then it is necessary).

Michael Karaman
President



Karaman Communications
4424 Bragg Blvd., Suite 101
Fayetteville, NC  28303
(910) 222-1234 (main)
(910) 222-1030 (direct)
(910) 222-1029 (fax)
www.karamancom.com

-----Original Message-----
From: kxt-bounces at kxthelp.com [mailto:kxt-bounces at kxthelp.com] On Behalf Of
Benjamin Hirsch
Sent: Tuesday, February 17, 2009 9:21 PM
To: kxt at kxthelp.com
Subject: KX-T: Voicemail


Hi,

I really enjoy following this group as I pick up quite a bit from you

professionals out there. Now I have a question of my own.

I recently changed locations and am trying to reconnect the Panasonic

KX-TVA50 to the KXTD-1232. However I am a bit confused as to how to

connect the ports. I believe the 2 ports are really for four

extensions. Now as I normally punch down 4 wires then skip 2 posts and

punch down another 4 wires for the standard extensions; do I do the

same here as well? Or do I only punch down 2 wires then skip 4 and

repeat for the next 3 extensions? I appreciate any help as you guys

always came through in the past.

Be Well!

Ben Hirsch




_________________________________________________________________
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt