KX-T: KX-TD1232 strobes on XDP port

[Raymond Martin]

Thanks Jim!

Where is parallel extension in the programming software?  Couldn't find it
in the help file.



-----Original Message-----
From: Jim Schultz [mailto:jamesschultz at optonline.net] 
Sent: Wednesday, January 07, 2009 6:10 PM
To: Raymond Martin; kxt at kxthelp.com
Subject: Re: KX-TD1232 strobes on XDP port

Half way there......disable XDP and set for parallel extension...

Jim

----- Original Message ----- 
From: "Raymond Martin" <ray at nantucket.net>
To: <kxt at kxthelp.com>
Sent: Wednesday, January 07, 2009 6:00 PM
Subject: KX-T: KX-TD1232 strobes on XDP port


> HI,
> Trying to set up strobes on a 1232.  In the old 1232-11D we just set up
> parallel extension in the programming and ran a duplex modular jack into 
> the
> wall plate.  After moving to the KX-TD1232 this no longer worked.
>
> The Wheelock strobes will work if plugged directly into the extension jack
> with no phone so the ringing voltage is correct.  However they will not 
> work
> when connected in series or when plugged into the XDP port with XDP 
> disabled
> in programming.
>
> Thanks for the help!
>
>
> _________________________________________________________________
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt 

No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.176 / Virus Database: 270.10.5/1881 - Release Date: 1/7/2009
5:59 PM